2Pcs Digital LED Temperature Controller Module 12V 10A 120W Digital Thermostat Switch Electronic Thermostat with Waterproof Probe Programmable Heating Cooling XH-W3001

XH-W3001 microcomputer temperature controller Supply voltage: 12V Temperature measurement range: -50℃~110℃ Temperature control range: -50℃~110℃ Temperature control accuracy: 0.1℃ Load power: 120W Measurement input: NTC10K waterproof probe output type: direct output Output capacity: max 10A Instructions: To set the startup temperature: Press the up button once to display the startup temperature, press and hold the up button for about 3 seconds, the startup temperature number will flash, and the desired temperature value can be set by the up and down buttons Set stop temperature: Press the down button once to display the stop temperature, long press the button for about 3 seconds, the stop temperature number will flash, and the desired temperature value can be set by the up and down buttons Reset: When the power is on, press and hold the up and down keys at the same time, the digital tube displays 888 and then automatically jumps to the detection temperature, that is, restores the factory settings Use cases: Control the water heater, stop heating when it reaches 65 ℃, and start heating again when the temperature drops back to 50 ℃. How to set it? Step 1: confirm that the working mode is heating mode and start it Temperature Step 2: long press the up button to start the temperature flashing, and set the start temperature to 50 ℃ through the up and down buttons. Step 3: long press the down button to stop the temperature flashing, and set the stop temperature to 65 ℃ through the up and down buttons. The setting is completed! Setting mode of refrigeration mode Setting Essentials: Start temperature > stop temperature (the program automatically determines that the working mode is refrigeration mode) Setting method: 1. Long press the up button, the start temperature flashes, and set the start temperature value thr

• W3001 digital LED temperature controller thermostat thermoregulator control devices are equipped with stainless steel probes, hardly rusting, having nice working performance,the ABS material make sure it is not easy to break.
• W3001 temperature controller comes with LED display, display the temperature clearly, making it convenient for you to read and adjust the temperature in time.
• There are 2 working modes of the digital LED temperature controller module, heating mode (start temperature is lower than stop temperature) and cooling mode (start temperature is higher than stop temperature), range from -50°C to 110°C; The high temperature control accuracy reaches 0.1℃
• W3001 microcomputer digital temperature controller module can be widely applied in the conditioning systems, incubators, equipment cases, temperature control protection and others
• Note : When setting the heating mode, if you accidentally set the set temperature value upside down, the output indicator will not light up and the load will not work. If the above situation occurs after setting, you can check whether the set temperature value is upside down